Reach Mowers
Véga Max III
Quality Work For The Most Demanding Users
OBTENEZ UNE RÉPONSE
The Véga Max III arm mower has been designed to carry out all scrub clearance, mowing and hedge trimming tasks. It has been sized to deploy all its power, even on difficult, complex tasks for over 800 hours every year!
The standard essentials
- Straight forward arm with 120° slew
- Rotor power 51 HP
- PTO 540 rpm
- Hydraulic cooler
- Hydraulic pivot breakaway safety feature
- 1.2-m shredding unit grass rotor with Y-blades
- Indirect by 3 V-belts
- Electrically-controlled rotor
- Ø 140-mm working roller with removable end caps
- 2-function EP electric proportional joystick control
- Electric lift float cut-out and hour meter
- Standard linkage mounting (2 stabilisers and tractor attachment plate)
Unit well balanced
- Heavy-duty, up to 20 mm thick with VHTS steel reinforcements
50-mm HSS (high-strength) steel shafts
Drive shaft within linkage mounting
Rugged design
- 30-mm very thick attachment points
- Ø 35 mm high strength steel shafts
- Cross fillet welds
- Double-skinned HTS steel construction, 2 x 4 mm
- Strengthened body sidewall, 6 mm + reinforcing 8 mm thick
- Rugged pulley housing, 4 mm thick + reinforcing 6 mm thick
- Front flap with tubular reinforcement offers better shock resistance
- HDX steel anti-abrasion skids
- Ø 140 mm, 7 mm thick
- Two ball bearings
- Machined assembly for perfect concentricity
- Open centre hydraulic circuit
- Cast iron pump and gear motor
ROTOR
Design of spiral rotor Machined tube and flanges for perfect concentricity and solidity
ROTOR BEARINGS
Double row of roller bearings
Baffle protection to prevent wire and twine clogging
High level sealing (double lip seal + felt seal)
Superlative cooling
- 16 kW
- Positioned on the left, away from flying debris
- Hinged screen for easy servicing
INDIRECT ROTOR DRIVE
by 3 V-belts VHP (Very High Performance)
One wide notched belt optional
Oil change every 1500 h
- Capacity 130 l
- Pressurized
- 10 μ pressure and return filters
Console
Electric lift float and cushioning control, hour meter, rotor direction and activation electrically selected, emergency stop
The particularly ergonomic joystick electro-proportional controller makes
for highly efficient work. Two functions,
the jib and the rocker, are proportional-action. All the functions are installed on the joystick for easy use (unit orientation, sweep, float, etc.).
Protective casing for rigid pipes
- LED lights (unit) fitted on silent blocks
- Adjustable stand legs
- Grass rotor (standard)
- Spiral rotor
- Rotor for thick branches
- Secateurs
- Multisaw
- Flail deck
- Standard linkage with two stabilizers
Hooking part to be adjusted to scale of tractor - 3-point CUMA linkage with 3 stabilizers supplied
3rd tractor point used (optional) - Châssis de stabilisation. Stabilized frame
Adaptor for tractor supplied (optional)
Kinématics
- Horizontal reach A (m): 5,00
- Vertical reach B (m): 5,70
- Ditch reach C (m): 3,25
- Bank reach D (m): 4,70
- Height on hedge E (m): 3,80
- Hedge-side reach F (m): 1,45
- Arm type and sweep : 800 mm right-hand or cranked forward arm, 120°
- Obstacle safety feature : Hydraulic security if obstacle encountered
- Unit rotation angle : 230°
- Weight(kg) : 1360
- Min. recommended tractor power (HP) : 70
- Min. recommended tractor weight(kg) : 3500
- Horizontal reach A (m): 5,50
- Vertical reach B (m): 6,30
- Ditch reach C (m): 3,60
- Bank reach D (m): 5,37
- Height on hedge E (m): 4,20
- Hedge-side reach F (m): 1,45
- Arm type and sweep : 800 mm right-hand or cranked forward arm, 120°
- Obstacle safety feature : Hydraulic security if obstacle encountered
- Unit rotation angle : 230°
- Weight(kg) : 1440
- Min. recommended tractor power (HP): 70
- Min. recommended tractor weight (kg): 3500
- Other models that may interest you
